Skip to content

Examples

EG release time (after note release).

Examples #

ampeg_release=1.34
fileg_release=0.2

In many instruments, ampeg_release will need to be set to avoid the sound cutting off unrealistically quickly when a note ends (unless the instrument uses loop_mode set to one_shot, in which case the entire sample will always play) even if amplifier envelopes are not used otherwise to shape the sound. Also, ampeg_release is used when off_mode is set to normal.

Although the spec default is 0.001, ARIA uses a default of 0.03 for smoother default cutoffs. Cakewalk products use 0.001.

Name Version Type Default Range Unit
ampeg_release SFZ v1 float 0.001 0 to 100 seconds
Modulations
ampeg_releaseccN float 0 -100 to 100 seconds
ampeg_vel2release float 0 -100 to 100 seconds

Category: Modulation, Envelope Generators