Skip to content

lfoN_scale

It’s possible for one LFO to use sub waveforms in addition to the main waveform. This can be used to create more complex LFOs. Up to 8 waveforms can be used in one LFO. This opcode is used to set the scaling between the specified sub waveform and the main waveform. lfoN_scale2 will set the ratio for the second waveform etc. Using lfoN_scale with no number after the scale is perhaps not needed very often, and scale will mostly be used on the sub waveforms, but it can also be set for the main waveform if needed.

Example
lfo01_scale2=0.5
lfo03_scale=0.7
lfo01_wave=12 //S&H style LFO used here for randomization
lfo01_pitch=10
lfo01_freq=2
lfo01_freq_oncc1=3

lfo01_wave2=1 //Sine waveform for the secondary waveform
lfo01_ratio2=4 //4 times faster
lfo01_offset2=0 //No offset
lfo01_scale2=0.3 //Shallower than the main wave